Saturday, March 12, 2011

470 ohm resistor

A schematic with a 9V battery, 470 ohm resistor, and a single LED of

A schematic with a 9V battery, 470 ohm resistor, and a single LED of

Resistor 470 Ohm 1/4 Watt

Resistor 470 Ohm 1/4 Watt

Connect the 82k resistor between 23E and 27F, and the 240 ohm resistor

Connect the 82k resistor between 23E and 27F, and the 240 ohm resistor

Bend the leads of two 470 ohm resistors as shown in experiment E1.

Bend the leads of two 470 ohm resistors as shown in experiment E1.

470 ohm, 1/2 Watt Resistor. The image of the resistor shown is just a stock

470 ohm, 1/2 Watt Resistor. The image of the resistor shown is just a stock

This is your last discrete resistor, it goes at R9. It's 470 ohms (Yellow

This is your last discrete resistor, it goes at R9. It's 470 ohms (Yellow

470 ohm resistor,and an old clear pen case. Cascade had the Item I needed.

470 ohm resistor,and an old clear pen case. Cascade had the Item I needed.

Solder 470 ohm resistors to pins 1 and 2 of the parallel connector.

Solder 470 ohm resistors to pins 1 and 2 of the parallel connector.

470 Ohm Resistors

470 Ohm Resistors

 100K ohms Resistor · 470 ohms Resistor · 9 Volt battery Snap

100K ohms Resistor · 470 ohms Resistor · 9 Volt battery Snap

470 Ohm Resistor, 2

470 Ohm Resistor, 2

Como el res 7.5 ohm 12.5w 1% alum ww - ual-10 7.5 ohm 1%, resistor silicone

Como el res 7.5 ohm 12.5w 1% alum ww - ual-10 7.5 ohm 1%, resistor silicone

For this project you will need: Electrical Components 470 ohm resistor (or a

For this project you will need: Electrical Components 470 ohm resistor (or a

470k Ohm Resistor

470k Ohm Resistor

Description: Resistor Kit, 220 ohm,

Description: Resistor Kit, 220 ohm,

A 470 ohm resistor was what I used, as shown in the picture.

A 470 ohm resistor was what I used, as shown in the picture.

style: Film Resistor. model no: N116. Value: 470 ohm. Lead: Copper

style: Film Resistor. model no: N116. Value: 470 ohm. Lead: Copper

A pair of 470-ohm 1W, or three 680-ohm to 1K-ohm 1W, should work fine.

A pair of 470-ohm 1W, or three 680-ohm to 1K-ohm 1W, should work fine.

1 X 470 ohm Resistor (not required at the moment since a compatible resistor

1 X 470 ohm Resistor (not required at the moment since a compatible resistor

470 Ohm High Quality Metal Film Resistor - Low temperature coefficient and tolerances - Excellent stability - Suitable for commercial and professional

470 Ohm High Quality Metal Film Resistor - Low temperature coefficient and tolerances - Excellent stability - Suitable for commercial and professional

No comments:

Post a Comment